Call us (Toll Free): AUS: 1300 506 505 NZ: 0800 944 788
Connect with us:
0

GN 801.3

Types

  • Type V: For toggle clamp with vertical tension lever
  • Type H: For toggle clamp with horizontal tension lever

Identification no.

  • No. 1: With proximity sensor
  • No. 2: Without proximity sensor

Retaining bracket / Retaining plate

Stainless steel AISI 304

Setting nuts

Stainless steel AISI 304

Socket cap screws / Washers / Nuts

Stainless steel

Proximity sensor at identification no. 1

  • Housing, stainless steel AISI 304
  • Inductive, 3-pole, PNP contact
  • Thread M8 x 1
  • Operating temperature -25 °C to +80 °C

Sensor holders GN 801.3 are designed as accessories for GN 810 and GN 820 series toggle clamps and enable contactless monitoring of the clamping positions using an inductive sensor.

When the clamping lever is in clamping position, the sensor electronics provide a high signal, e.g. to a machine control unit, and additionally indicate this switch status with an LED on the sensor.

Operating errors can thus be reliably detected and process reliability increased.

The sensor holder can be retrofitted to toggle clamps and mounted on the right or left, depending on the installation situation of the toggle clamp. All parts are supplied unmounted as a set. The proximity sensor is not included in the scope of delivery of identification no. 2.

  • GN 330 Cables with Connector Coupling (3-pole, 2 or 5 meters long)

  • General Information for Toggle Clamps 
  • Stainless Steel Characteristics 

 

Sensor holders can be mounted on the left or right of the toggle clamp. To do this, the setting nuts must be tightened on the left or right of the retaining plate, to secure them against rotation and loss. This facilitates the further assembly of the sensor holder and the adjustment of the sensor. Subsequent changing of the mounting side is not intended.

The sensor is inserted into the bore in the retaining bracket according to the selected mounting side and the depth is adjusted and fastened using the nuts in such a way that the clamping lever reliably switches it in the clamping position.

Error: Error%20%231085

LOOKING FOR SOMETHING:

Feeling overwhelmed with what product to choose?

Don’t delay, give OIC a call and talk to us about your industrial application. Our aim is to help your business choose the right Elesa+Ganter element for the function you need. Whether you need to clamp, close, connect, control, level, manoeuvre, measure or set. OIC has an Elesa+Ganter machine element to fit your need.

We want to find out about your industrial application need and where we can help. Our contact details are below.

CONTACT US