Call us (Toll Free): AUS: 1300 506 505 NZ: 0800 944 788
Connect with us:
0

GN 722.6

Types

  • Type A: With pull ring, without rest position
  • Type C: With pull ring, with rest position
  • Type E: With latch, with rest position

Guide

Steel precision casting

  • Zinc plated, blue passivated ZB
  • Zinc plated and powder coated

Black, RAL 9005, textured finish SW

Guide

Stainless steel precision casting AISI 316 A4

Pull ring

  • Steel precision casting

Zinc plated, blue passivated (ZB and SW)

  • Steel precision casting AISI 316 (for A4)

Latch

  • Steel precision casting

Zinc plated, blue passivated (ZB and SW)

  • Steel precision casting AISI 316 (for A4)

Plunger Pin

  • Steel precision casting

Steel, zinc plated, blue passivated (ZB and SW)

  • Stainless steel AISI 316 (for A4)

Grub Screw DIN 915 (Type A)

  • Steel, zinc plated (for ZB and SW)
  • Stainless steel (for A4)

Pressure spring

Stainless steel AISI 316Ti

With indexing plungers GN 722.6, the plunger pin is actuated via the pull ring / latch. This is done either manually, with a cable or by means of an extended pull rod with hook. The ST version is designed for applications in steel construction, whereas the stainless steel version A4 is suitable for use in particularly aggressive environments.

The type with rest position is used when the plunger pin should temporarily not protrude. For this purpose, the pull ring is turned sideways after the locking pin has been retracted. The ring is held in this position by the catch groove at the top of the guide.

The dimensional tolerances between the pin and the guide have been chosen to ensure functional reliability even in roughly dimensioned applications or in the event of soiling.

For fastening, slotted or hexagonal mounting holes allow the use of socket cap screws DIN 912 and hex screws or nuts according to DIN 931 or DIN 934.

  • Range of Indexing Plungers 

  • Load Rating Information 
  • Stainless Steel Characteristics 

LOOKING FOR SOMETHING:

Feeling overwhelmed with what product to choose?

Don’t delay, give OIC a call and talk to us about your industrial application. Our aim is to help your business choose the right Elesa+Ganter element for the function you need. Whether you need to clamp, close, connect, control, level, manoeuvre, measure or set. OIC has an Elesa+Ganter machine element to fit your need.

We want to find out about your industrial application need and where we can help. Our contact details are below.

CONTACT US